Ativa AWGR54 User Manual download pdf (Page 24)

Alternate Setup Method

The Web-Based Advanced User Interface is a web-based tool that you can use

to set up the Router if you don’t want to use the Easy Install Wizard. You can

also use it to manage advanced functions of the Router. From the Web-Based

Advanced User Interface, you can perform the following tasks:

• View the Router’s current settings and status

• Configure the Router to connect to your ISP with the settings that they

provided you

• Change the current network settings such as the Internal IP address, the

IP address pool, DHCP settings, and more

• Set the Router’s firewall to work with specific applications

(port forwarding)

• Set up security features such as client restrictions, MAC address filtering,

WEP, and WPA

• Enable the DMZ feature for a single computer on your network

• Change the Router’s internal password

• Enable/Disable UPnP (Universal Plug-and-Play)

• Reset the Router

• Back up your configuration settings

• Reset the Router’s default settings

• Update the Router’s firmware

Step 1 Connect your Router

1.1

Turn off the power to your modem by unplugging the power supply from

the modem.

1.2 Locate the network cable that is connected between your modem and

your computer and unplug it from your computer, leaving the other end

connected to your modem.

1.3 Plug the loose end of the cable you just unplugged into the port on the

back of the Router labeled “Modem”.

1.4 Connect a new network cable (not included) from the back of the

computer to one of the wired computer ports labeled “1–4”. Note: It

does not matter which numbered port you choose.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 105 106

No comments

Ativa AWGR54 User Manual Page 24