Ativa AWGR54 User Manual download pdf (Page 58)

Using the Web-Based Advanced User Interface

Using the Access Point Mode

Note: This advanced feature should be employed by advanced users only.

The Router can be configured to work as a wireless network access point.

Using this mode will defeat the NAT IP sharing feature and DHCP server.

In Access Point (AP) mode, the Router will need to be configured with an

IP address that is in the same subnet as the rest of the network that you

will bridge to. The default IP address is 192.168.2.254 and subnet mask is

255.255.255.0. These can be customized for your need.

1. Enable the AP mode my selecting “Enable” in the “Use as Access Point

only” page. When you select this option, you will be able to change the

IP settings.

2. Set your IP settings to match your network. Click “Apply Changes”.

3. Connect a cable from the WAN port on the Router to your

existing network.

The Router is now acting as an access point. To access the Router’s

Web-Based Advanced User Interface again, type the IP address you specified

into your browser’s navigation bar. You can set the encryption settings, MAC

address filtering, SSID, and channel normally.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

No comments

Ativa AWGR54 User Manual Page 58